ENGINEERED INDUSTRIAL SOLUTIONS, TRUSTED TO PERFORM.

Daikin’s Hybrid Cooling technology combines the benefits of air cooling and evaporative cooling to optimize cooling efficiency and energy-saving solutions in areas with dry climates or low humidity. The system first uses the air cooling mode, where the air passes through the evaporator coil and is cooled by the refrigerant.

This initial cooling process reduces the air temperature. Then, if the outdoor temperature and humidity conditions are suitable, the system switches to evaporative cooling mode. In this mode, water is introduced into the air stream, and evaporation takes place, further reducing the air temperature. The combination of air cooling and evaporative cooling allows for enhanced cooling performance while minimizing energy consumption. The decision to switch between air cooling and evaporative cooling modes is typically automated and based on outdoor temperature and humidity levels. If the outdoor conditions are not suitable for evaporative cooling, the system will continue operating in air cooling mode.

The Streamer discharge is a type of plasma discharge that generates “high-speed electrons”, which have high oxidative decomposition power in a three-dimensional and wide range, so the oxidative decomposition power is 1,000 times or more compared to general plasma discharge (glow discharge).

With this technology, high-speed electrons that combine with air components have a strong oxidative decomposition power, so they continuously act on odors, bacteria, and indoor pollutants.

This feature improves air distribution and comfort. It is utilized to direct airflow along the ceiling or walls, allowing for a more even and comfortable distribution of conditioned air throughout the room. By directing the airflow along the ceiling, the air is given more time to mix and circulate before reaching the occupants, which helps to eliminate drafts and create a more pleasant environment. The Coanda effect is achieved in Daikin air conditioners by using specially designed louvers or vents. 

This operation dries the inside of air conditioner to reduce the developmentof mold and odour inside. During operation, flap opens and air flows.

Can be connected to Daikin Mobile Controller Application. This allows your indoor air conditioning unit to be controlled wherever you are. 

If no one is in the room for more than 20 minutes, the operation automatically
changes to energy saving operation.

The intelligent eye sensor detects human movement and adjusts the right and
left airflow direction. It can be set to avoid or to direct airflow specifically.

Using weekly scheduler, you can set up to four patterns for starting and stopping your air conditioners. It will automatically turn on before you wake up or return home and turn off after you go to bed or go outside of your home. Separate patterns can also be set for each day of the week.